English
简体中文
Total: £ 56.28
2024-04-10 | Pages: 119 | Tables: 220
High-pressure gaseous hydrogen storage containers are mainly divided into pure steel metal bottle (type I), steel liner fiber winding bottle (type II), aluminum liner fiber winding bottle (III type) and plastic inner liner fiber winding bottle (IV ty...
2024-04-10 | Pages: 86 | Tables: 171
The hydrogen ejector is a hydrogen circulation system and an important part of the fuel cell. The fuel cell relies on the electrochemical reaction of hydrogen and oxygen to generate electricity. During the working process of the fuel cell, the hydrog...
2024-04-10 | Pages: 103 | Tables: 207
The cooling of the nuclear island needs to be completed by the main pump; secondly, the heat generated in the nuclear island should be taken out and exchanged with the secondary side of the steam generator, thereby promoting the steam turbine generat...
2024-04-10 | Pages: 114 | Tables: 221
The metal powder injection molding mold is the basic part of the MIM process. The main structure of the metal injection molding mold (commonly known as MIM mold) is roughly the same as that of the traditional plastic mold, which consists of three maj...
2024-04-10 | Pages: 119 | Tables: 222
MIM is a new type of powder metallurgy process in which metal powder is mixed with a binder to form a "feed" and then molded by injection molding. This process creatively combines powder metallurgy and injection molding, which can realize large-scale...
2024-04-10 | Pages: 115 | Tables: 221
Claw-type air compressors cost-effectively generate contactless compressed air, and claw-type rotors control media delivery by opening and closing inlet and outlet passages. Therefore, no sealing fluid is required in the compression chamber.The globa...
2024-04-10 | Pages: 103 | Tables: 201
The sanitary centrifugal pump consists of the following parts: standard motor, impeller, pump casing, sanitary mechanical seal. It features an internal clean-free and washable seal with a professional cleaning system (CIP), an external stainless stee...
2024-04-10 | Pages: 97 | Tables: 212
Electrostatic spraying refers to a coating method that uses the principle of corona discharge to make the atomized paint negatively charged under the action of a high-voltage DC electric field, and adsorbed on the surface of the positively charged su...
2024-04-10 | Pages: 102 | Tables: 199
The vacuum booster can increase the performance of the vacuum system by up to ten times at the pumping speed and ultimate pressure of the vacuum pump.The global Vacuum Boosters market was valued at US$ million in 2023 and is anticipated to reach US$ ...
2024-04-10 | Pages: 111 | Tables: 220
When the high-pressure centrifugal fan is working, the power machine (mainly the motor) drives the impeller to rotate in the volute casing, and the air is sucked in from the center of the impeller through the suction port. Due to the dynamic action o...
2024-04-10 | Pages: 116 | Tables: 225
The material of the silent oil-free air compressor itself does not contain oily substances, and there is no need to add any lubricating oil during operation, so the quality of the discharged air is greatly improved, and the safety of the supporting e...
2024-04-10 | Pages: 96 | Tables: 200
Oil-free pumps have a higher upfront cost than traditional oil-sealed pumps, but they require virtually no maintenance or regular oil changes like oil-sealed pumps. There is also no risk of generating polluting waste.The global Oil-Less Rotary Vane V...
2024-04-10 | Pages: 95 | Tables: 211
Different from traditional blower bearings, air suspension bearings use aviation technology, use air as the medium, and do not require friction. They are 100% environmentally friendly components without lubricating oil. It is widely used in aviation ...
2024-04-10 | Pages: 115 | Tables: 223
The permanent magnet variable frequency centrifugal blower adopts high-speed permanent magnet synchronous motor technology, which saves the complicated speed-increasing gearbox and lubricating oil system required by traditional blowers, and the compr...
2024-04-10 | Pages: 113 | Tables: 221
The use of dynamic pressure air suspension bearing, ternary flow impeller and high-speed permanent magnet synchronous motor technology saves the complicated speed-increasing gearbox, coupling and lubricating oil circulation system required by traditi...
